Hello to all X-Winder user, I wanted to share my g-code file that I hand edited myself in order to see if removing some commands would fix my filament displacement issues. To make a long story short I basically removed the M602 and G4 L602 CXX commands. These were the ones that were giving me problems.
NOTE: This file is for 2 axis only.
Let me know if this worked for you guys.
I have to copy and paste the code on here, because the uploader doesn't want to upload the file for some reason, sorry about that.
[G-CODE GENERATED BY X-WINDER DESIGNER v421 on 09/08/2019 19:18]
[FileName= 54mm Triple Helix Pattern.X2G ]
[Units are in INCHES ]
[FilePath= C:\Program Files (x86)\X-Winder\X-Winder40\XW_G-Code_Files\ ]
[GENERAL PART DESCRIPTION: LeftDia=2.15 RightDia=2.15 ]
[GENERAL PART DESCRIPTION: TotLen=64.00 FilaWidth=0.1875 ]
[GENERAL PART DESCRIPTION: FilaThickness=0.0070 ]
[INITIALIZE WINDING SESSION -------------------------------- ]
C C0 [DECIMAL COMMA FORMAT = NO]
G20 [Units are Inches]
G90 [Absolute Positioning]
X V421.000 T2 Z2.500 [X-WINDER DESIGNER VERSION NUMBER, FILE TYPE, AND Z-AXIS MEAS. OFFSET DISTANCE]
M711 H0 M14 S0 [Estimated Total Build Time]
[ENABLE STEPPERS AND MOVE TO STARTING POSITION --------------- ]
M17 [Enable Steppers]
G28 F1.000 [Move Carriage to LS]
G4 Z P10000 [Pause 1000ms]
G1 F1.000 Z4.000 [Move Carriage to Starting Position]
[BEGIN 2-AXIS WINDING --------------------------------------------------------- ]
D0 ST=Winding Schedule
M0 [Wait for Button Press to Begin Winding Schedule]
[BEGIN LAYER 1 of 1 --------------------------------------------------- ]
D0 LA=1_of_1 PA=1_of_30 RPM=37.3 CS=6 WA=35 WM=ms TI=13.6 LD=2.15 FW=0.1875 [Display Layer Properties]
[This is a REGULAR layer, Carriage Dwelling IS required.]
M4 S37.3 [Mandrel CW Rotation]
M601
G4 C180
G4 L601 C0 [Carriage Dwell Home End]
G1 F6 Z68.00 [Carriage Move to Z=68.00]
G4 C360 [User Added Add'l Wrap Angle=360 deg.]
G4 L601 C0 [Carriage Dwell Home End]
G1 F6 Z4.00 [Carriage Move to Z=4.00]
G4 C360 [User Added Add'l Wrap Angle=360 deg.]
D0 LA=1_of_1 PA=2_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C120.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C120.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=3_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C240.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C240.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=4_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C12.00 [Carriage Dwell Home End]
G1 F6 Z68.00 [Carriage Move to Z=68.00]
G4 C360 [User Added Add'l Wrap Angle=360 deg.]
G4 L601 C12.00 [Carriage Dwell Home End]
G1 F6 Z4.00 [Carriage Move to Z=4.00]
G4 C360 [User Added Add'l Wrap Angle=360 deg.]
D0 LA=1_of_1 PA=5_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C132.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C132.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=6_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C252.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C252.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=7_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C24.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C24.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=8_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C144.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C144.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=9_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C264.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C264.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=10_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C36.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C36.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=11_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C156.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C156.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=12_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C276.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C276.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=13_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C48.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C48.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=14_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C168.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C168.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=15_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C288.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C288.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=16_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C60.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C60.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=17_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C180.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C180.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=18_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C300.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C300.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=19_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C72.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C72.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=20_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C192.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C192.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=21_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C312.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C312.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=22_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C84.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C84.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=23_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C204.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C204.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=24_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C324.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C324.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=25_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C96.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C96.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=26_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C216.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C216.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=27_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C336.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C336.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=28_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C108.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C108.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=29_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C228.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C228.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 LA=1_of_1 PA=30_of_30 RPM=37.3 CS=6 WA=35.0 WM=ms LD=2.15 FW=0.1875 [Display Layer Properties]
G4 L601 C348.00 [Dwell Until Mandrel Shift Angle Reached]
G1 Z68.00 [Move to Z=68.00]
G4 C360 [Add User Defined Add'l Angle=360 deg.]
G4 L601 C348.00 [Dwell Home End To Mandrel Shift Angle]
G1 Z4.00 [Move to Z=4.00]
G4 C360 [Carriage Dwell Home End by User Defined Add'l Angle=360 deg.]
D0 GM=Winding_Process_Complete
M5 [Mandrel Stop - Winding Complete]
Comments