"For anyone that wants to work with the 3-Axis-No-Wrap mode (even after reading Turner's comment) you can use versión v4.17 where that option is available. "
"For posterity. I'm running the "Set up Wizard" in the X-Winder Executor v4.17. The changes I make in the wizard (max Amps, gearing ratio) are not saved and the default values are used. This is a problem because I have a non-standard gearing ratio of…"
"Vinicius, Entre em contato comigo na Zasso Brasil para conversarmos como podemos nos ajudar mutuamente. Estamos localizados em Indaiatuba e estamos iniciando a montagem do equipamento agora.
Abraço,"
"Olá Guilherme tudo bem ?
Eu comprei uma X Winder recentemente para iniciar um projeto pessoal, mas não consigo usar a máquina de jeito nenhum, também uso fibra de vidro com rolo de desenrolarem interno, mas meu problema ainda nem é esse, eu não…"
"Fully agree! We are in urgent need of knowledge sharing from other users.
We also have our own experiences/knowledge and improvements to share with our 4 axis and 16" mandrel 34 motor upgrades."
"HI Scott,
Are you still winding nosecones with your XWinder? Our rocket team is about to tackle this challenge and are hoping to get some advice from someone who has been there before.
"Mayank - As you know, the X-Winder is a highly modifiable filament winding machine and you could add a second mandrel above the main mandrel by extending the vertical mandrel posts. You could gear the second mandrel to the firest mandrel and only…"
Winding Machine Optimisation_Composite Braiding Ltd.pdfWe have a 2 axis X-Winder helping in winding 1 mandrel at a time.Could we add another motor to the current setup and winding 2 mandrels simultaneously? We can add another control box if…
"We are a web tension control solution provider and some of your clients are asking about tension control for the tows feeding your applicator “heads”. One client says he needs up to 100N of tension but I am trying to confirm if that is a valid…"
"I've investigated this issue and it appears to be related to the system setting for the decimal separator. The software expects a period (.) to be used instead of a comma. If you just enter a period, this won't work as the software still saves this…"
"I've experienced the same issue; changed my USB hub to one that was powered externally and used the older software version 4.16, everything works fine now. Latest software doesn't seem to work well with the 4-axis machine; it kept forgetting the…"
"Hi Alexander,
Thanks for your answer. I tried to uninstall et re-install the software but it did not work as planned... I am using the 4axis machine as a 2 axis machine and I thought maybe the problem was coming from one of the connections to the…"
"Hi Camille,
This is very unusual, the latest software is supposed to help with the latest winding parameters. Were you able to fix the problem? The only advise I can consult is to uninstall the software and re-install it. Hopefully this has been…"
"Hello Alastair,
I faced the same problem over the last week or so. If reversing the polarity didn't solve it for you, you can write the M4 S10 C-180 in the same line as your G1 command. If both of them take the same time to complete it will rotate…"