Titouan Le Gallic

"Hi Vernon,
I try to realize a similar application. Can you send me the C-Code of this winding shown in the Video? Would be great.
My Mail is: titouan.legallic@yahoo.com"

"Dear X-Winder team

We are working with a 4-axis X-Winder machine on some complex lay-up. We have manage to lay 0° fiber for example.
In order to add reinforcement fiber around some insert on the mandrel, we would like to make some CCW and CW…"

Dear X-Winder team

We are working with a 4-axis X-Winder machine on some complex lay-up. We have manage to lay 0° fiber for example.

In order to add reinforcement fiber around some insert on the mandrel, we would like to make some CCW and CW movement on the Z axis in the same program, without exchanging the cables on the control board.

Is it possible ?

We have tried some G-Code lines but without success for now.

(Utilisation de G1=position et valeur négative)

(Utilisation de G1=position et valeur positive)

(Utilisation de M4 avec valeur négative)

(Utilisation de M3)

Thanks in advance for your help.

Best regard

Comments

Titouan Le Gallic November 7, 2024 at 2:56am

Dear X-Winder team

We are working with a 4-axis X-Winder machine on some complex lay-up. We have manage to lay 0° fiber for example.

In order to add reinforcement fiber around some insert on the mandrel, we would like to make some CCW and CW movement on the Z axis in the same program, without exchanging the cables on the control board.

Is it possible ?

We have tried some G-Code lines but without success for now.

(Utilisation de G1=position et valeur négative)

(Utilisation de G1=position et valeur positive)

(Utilisation de M4 avec valeur négative)

(Utilisation de M3)

Thanks in advance for your help.

Best regard

This reply was deleted.