Alexander Solis commented on Jean Girardot's blog post Carbon tow size
"This is going to be a tube correct?"
Nov 6, 2019
Alexander Solis commented on Jean Girardot's blog post Carbon tow size
"I have done some tests on 24K. The concave roller delivery head on the four axis allows for such a wider tow to be used. As for 50K, I'd dare not go that far."
Nov 6, 2019
jonathan hernandez commented on Jean Girardot's blog post Carbon tow size
"We were able to find some 50k from zoltek but we didn't want to buy it and not work for us. I think we might just get a range of tow in small quantities then make the decision afterwards."
Nov 6, 2019
Alexander Solis commented on Jean Girardot's blog post Carbon tow size
"First off you can no longer wind in 3 axis mode, which I am going to beg turner hunt to bring it back. You will have to modify the four axis delivery head to have additional rollers to prevent fiber slippage.
Since you have the four axis you can…"
Nov 6, 2019
jonathan hernandez commented on Jean Girardot's blog post Carbon tow size
"Hi, our student rocketry team just got the 4x-34 x winder & we were looking to wind large parts. These parts would be a little under .4m in diameter and over a meter in length. When we went through the designer software we saw it would take over a…"
Nov 6, 2019