"I've investigated this issue and it appears to be related to the system setting for the decimal separator. The software expects a period (.) to be used instead of a comma. If you just enter a period, this won't work as the software still saves this…"
The problem may be due to a delay accumulated from the computer through USB connections, hubs and boards to each motor.
As each board gives the signal to one motor, if the delay is diferent from one to another, then this could explain…"
"Hi I just build up my 4x-23 and tired the software version 4.21 for start. It isn`t usable actually. The DH becomes very hot and the setup window apears when I set the parameters and when I try homing.
What I found out was that the motor amp value…"
I am using this laptop : Hp probook 640 g1, x64, RAM 16Go, Processor I7 - 4610M - 3GHz - 2 cores with Windows 10 Pro.
Have you tried diferent computers and found one that seems to have a better compatibility with X-winder program ?"
"I am coming back in this discussion to ask if somoene would agree to share the design parameters and corresponding g-code of a 3-axis no wrap part with angles (helical winding) and no gaps between tapes, like in this video for exemple…"
Hello everyone,I tried the newest version 4.21 of the software on my 4x-23 machine but I have some issues :When I order home or build from the designer software, the setup wizard window appears, then I set up every parameters (assigned boards,…
"Hi Mike, I'm having the same kind of issue with the 4-axis winding machine using 4.17 version of the software.
When I click on "Build" button in the design software, the program is well executed, with right positions along Z axis. But when I execute…"
"Hi Alexander, hi everyone,
I am joining the discussion because I am experiencing the same kind of problem. I am working with a 4x-23 in 3-axis mode and version 4.17 of the software. I notice a variable gap for each pass (a bit more marked in L602…"