Gender
Male
- Activity Feed
- Photos
- Blog Posts
- Discussions
- Comment Wall
- About
Loading ...
"I've investigated this issue and it appears to be related to the system setting for the decimal separator. The software expects a period (.) to be used instead of a comma. If you just enter a period, this won't work as the software still saves this…"
"Hi Alexander,
Thanks for your feedback, I would be happy to have a look to your g-code and try it. I usually work with a 3,268 inches diameter (I can go up to 8 inches) and a 8 inches length."
Thanks for your feedback, I would be happy to have a look to your g-code and try it. I usually work with a 3,268 inches diameter (I can go up to 8 inches) and a 8 inches length."
"Alexander,
The problem may be due to a delay accumulated from the computer through USB connections, hubs and boards to each motor.
As each board gives the signal to one motor, if the delay is diferent from one to another, then this could explain…"
The problem may be due to a delay accumulated from the computer through USB connections, hubs and boards to each motor.
As each board gives the signal to one motor, if the delay is diferent from one to another, then this could explain…"
"Hi, the old software 4.16 works for me. I hope you can fix the bugs in version 4.21."
"Hi I just build up my 4x-23 and tired the software version 4.21 for start. It isn`t usable actually. The DH becomes very hot and the setup window apears when I set the parameters and when I try homing.
What I found out was that the motor amp value…"
What I found out was that the motor amp value…"
"Hi Alexander,
I am using this laptop : Hp probook 640 g1, x64, RAM 16Go, Processor I7 - 4610M - 3GHz - 2 cores with Windows 10 Pro.
Have you tried diferent computers and found one that seems to have a better compatibility with X-winder program ?"
I am using this laptop : Hp probook 640 g1, x64, RAM 16Go, Processor I7 - 4610M - 3GHz - 2 cores with Windows 10 Pro.
Have you tried diferent computers and found one that seems to have a better compatibility with X-winder program ?"
"I am coming back in this discussion to ask if somoene would agree to share the design parameters and corresponding g-code of a 3-axis no wrap part with angles (helical winding) and no gaps between tapes, like in this video for exemple…"
Hello everyone,I tried the newest version 4.21 of the software on my 4x-23 machine but I have some issues :When I order home or build from the designer software, the setup wizard window appears, then I set up every parameters (assigned boards,…
"Hi Mike, I'm having the same kind of issue with the 4-axis winding machine using 4.17 version of the software.
When I click on "Build" button in the design software, the program is well executed, with right positions along Z axis. But when I execute…"
When I click on "Build" button in the design software, the program is well executed, with right positions along Z axis. But when I execute…"
"Hi Alexander,
I am using a laptop with windows 10 in it. Do you think the type of computer could affect the software ?"
I am using a laptop with windows 10 in it. Do you think the type of computer could affect the software ?"
"Hi Alexander, hi everyone,
I am joining the discussion because I am experiencing the same kind of problem. I am working with a 4x-23 in 3-axis mode and version 4.17 of the software. I notice a variable gap for each pass (a bit more marked in L602…"
I am joining the discussion because I am experiencing the same kind of problem. I am working with a 4x-23 in 3-axis mode and version 4.17 of the software. I notice a variable gap for each pass (a bit more marked in L602…"
Loading ...
You need to be a member of X-Winder to add comments!
Comments
Good Day,
How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:(mrsstellaabudheir@gmail.com ) for the full details.
Have a nice day
Thanks God bless.
Stella.
Hi Alexander,
I am using a laptop with windows 10 in it. Do you think the type of computer could affect the software ?
Hi Maxime Fournier, what type of computer are you using when winding (example laptop, surface, or PC).