Gender
Male
- Activity Feed
- Photos
- Blog Posts
- Discussions
- Comment Wall
- About
Loading ...
"We once made measurements for fibre tension and reached a maximum of 12N (~2.6lbs). However, in our setup, we could have tightened the velcro strap a little more and additionally the strap was placed on the plastic spool holder. So, I assume you…"
"Does one of the stepper motors fai (stall)l at 3.5 lb tension, or do you mean you can't get enough friction on the reel for more than 3.5lbs tension ?"
The pre-preg tow I'm working with requires a min. of 10 lb tension per tow (according to the manufacturer). I've tightened the velcro strap as much as I can but it only holds up to 3.5lbs of tension. Any suggestions on how to fix this?
"yes, the video you reference states, "layers can be staggered to produce varaible wall thickness". To do this requires manual modification of the G-Code file. Create a g-code file of your part, the send to xfo and we can show you how."
"yes, the video you reference states, "layers can be staggered to produce varaible wall thickness". To do this requires manual modification of the G-Code file. Create a g-code file of your part, the send to xfo and we can show you how."
According to the X-Winder 2 axis tutorial: https://youtu.be/czCtrogZ3sw?t=295 it says we can make variable thicknesses on our mandrel (apparently I can't post two images in one post, so just click the link with the timestamp)However i don't see…
Loading ...
You need to be a member of X-Winder to add comments!
Location
Baltimore, MD
Comments
Good Day,
How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:(mrsstellaabudheir@gmail.com ) for the full details.
Have a nice day
Thanks God bless.
Stella.