Agustin Canalis commented on waseem's blog post using4x-34 for 3Axis mode wining
"For anyone that wants to work with the 3-Axis-No-Wrap mode (even after reading Turner's comment) you can use versión v4.17 where that option is available. "
Feb 24, 2021
Turner Hunt commented on waseem's blog post Detached:phidgetStepper Phidget
"The X-Winder ships with an un-powered USB hub. Some PCs do not provide enough thru the USD socket to power this USB Hub. If you purchase a powered USB Hub for about $15 USD this will solve your "Detached" issue."
Nov 7, 2019
Turner Hunt commented on waseem's blog post using4x-34 for 3Axis mode wining
"In version 4.22 of the X-Winder software, we have removed 3-axis winding because it has not produced good results. We have added 2-Axis winding as a replacement and you need the 2X-Delivery head for 4-Axis winder to accomplish 2-Axis winding on the…"
Nov 7, 2019
waseem posted a blog post
Dear all,Could you please guide me, How can I use 4X-34 filament winder for 3-Axis mode (as shown in this video https://www.youtube.com/watch?v=XAy-nWMypvk) using new version software 4.22.Because in the software, we have only 2X and 4X option there…
Nov 7, 2019
waseem posted a blog post
Dear all, I am also facing the problem with delivery head movement. After some passes delivery head moves forward towards the mandrel and eventually it hit the mandrel.so my problem is somehow is the same as posted by Henry James (delivery head…
Aug 3, 2019
waseem commented on Henry James's blog post Delivery Head Retraction
"Dear henry, I am also facing the same problem. but in my case delivery head move forward fafter some time and eventually tends to hit the mandrel. i am using latest software from the xwinderwebsite.which version you are using?
Any tips to resolve…"
Aug 3, 2019
waseem and Jeff are now friends
May 18, 2019
waseem posted a blog post
Hello every one,Can any body guide me how can I control linear accelerations (I, J, K) of 4-axis winding machine?Thanks and best regardswaseem
May 18, 2019
waseem posted a blog post
Dear sir/madam, please anybody let me know how I should handle this errorError is like that“Detached:phidgetStepper PhidgetBipolar Stepper Controller 1-motor 507314202” This error occurs frequently, Thanks, and best regards waseem
Apr 15, 2019
waseem posted a blog post
Hello turner,I am getting this error. when I try to create the g code file. please guide me how can overcome this error se the attached fileThanksRegardsWaseem
Apr 13, 2019
waseem is now a member of X-Winder
Apr 12, 2019